Leave Your Message
Architectural Facade & Structural Envelope Fastening

Roofing Sheet Screws For Curtain Wall Building Systems

Engineered for structural resilience, bi-metallic integrity, extreme wind load resistance, and hermetic weatherproofing in contemporary multi-story and high-rise envelope assemblies.

Engineered Precision Line

Featured Curtain Wall & Roofing Envelope Fasteners

High-performance structural fasteners optimized for dynamic shear resistance, galvanic isolation, and high-speed installation across modern building envelopes.

Commercial & Structural Dynamics

The Critical Role of Roofing Sheet Screws in Modern Curtain Wall Building Envelopes

In modern commercial architecture and high-performance civil engineering, the transition zone between exterior roofing skins and vertical curtain wall assemblies represents one of the most critical structural junctions. Far from being simple mechanical fasteners, roofing sheet screws engineered for curtain wall buildings serve as fundamental load-transfer components that preserve the hermetic seal, structural safety, and aesthetic continuity of the building envelope. As architects push the limits of modern cantilevers, parametric facades, and continuous roof-to-wall rainscreens, fasteners must endure dynamic multi-axial stresses that ordinary standard hardware cannot withstand.

The global industrial landscape reflects a massive shift toward modular, unitized curtain wall cassettes and pre-engineered metal building (PEMB) enclosures. In these systems, wind uplift forces generate severe negative suction pressures, while seismic oscillations produce cyclic lateral racking across structural mullions and transoms. Consequently, self-drilling and self-tapping screws utilized within curtain wall perimeters, parapet flashings, and profiled metal exterior panels must guarantee superior pull-out strength, minimal drill-torque variability, and exceptional ductility to prevent brittle shearing under sustained building movements.

Engineering Insight: Façade engineering guidelines under ASTM E330 and EN 1993-1-3 mandate that envelope fasteners maintain structural clamping torque across severe thermal expansion differentials (ΔT ≥ 80°C) between external aluminum extrusions and structural steel sub-frames without loosening or inducing stress corrosion cracking.
⚒

Bi-Metallic Synergy & Metallurgy

Curtain wall applications frequently integrate dissimilar metals, such as attaching prepainted zinc-aluminum coated steel sheets to extruded aluminum 6063-T6 or heavy structural steel purlins. DaHe manufactures bi-metal self-drilling screws featuring austenitic 304/316 stainless steel shanks flash-butt welded to ultra-hardened carbon steel drill points. This configuration delivers effortless drilling through heavy structural profiles up to 12.5mm thick while providing lifelong electrochemical galvanic resistance in coastal and industrial atmospheric conditions.

⚙

Zero-Leakage Sealing Architecture

Water ingress at curtain wall-to-roof transitions represents an catastrophic liability for commercial building envelopes. Our screws incorporate vulcanized EPDM bonded washers engineered with specific durometer hardness (65–75 Shore A). When torqued, the flange distributes compressive force radially, forming a hermetic barrier that resists positive standing water heads, driving monsoon rains, and capillary vacuum infiltration.

Advanced Fastener Engineering

Key Technological Benchmarks in Façade & Roofing Screws

Engineered to satisfy stringent international building codes, every DaHe fastening solution undergoes rigorous mechanical, metallurgical, and micro-climate testing.

★

Optimized Drill Point Geometry

Equipped with proprietary #3, #4, and #5 cutting points, our screws eliminate the need for center punching or pilot pre-drilling. The precision-forged flute evacuates metal swarf immediately, preventing galvanic swarf staining and thread stripping in curtain wall framing extrusions.

⚗

Multi-Layer Anti-Corrosion (Ruspert)

Subjected to up to 1,500–3,000 hours of neutral salt spray testing (ASTM B117) and 15–30 cycles of Kesternich sulfur dioxide exposure (DIN 50018). Our specialized metallic zinc-tin baked ceramic coatings shield the substrate against acid rain, maritime salt spray, and urban smog.

✔

Dynamic Pull-Out & Shear Capacity

Formed with strict pitch tolerances and buttress-style thread profiles to maximize mechanical interlock within light-gauge framing and heavy steel profiles. This provides dependable resistance against continuous pulsating cyclic wind pressures and seismic shear deformation.

⚡

Thermal Bridging & Air Permeability

In contemporary passive house facades and LEED-certified green buildings, thermal envelope continuity is non-negotiable. Our nylon-head and composite encapsulated fasteners provide a thermal buffer, eliminating condensation risks and lowering localized U-value degradation.

✴

Automated Robotic Installation Fit

Featuring exact dimensional concentricity between drive recess and screw axis, our fasteners support high-speed robotic feeding and automatic screw-driving systems used in prefabricated modular unitized curtain wall assembly factories, minimizing cam-out rates.

🛡

UV & Ozone Stable Elastomers

Washers molded from high-grade, sulfur-free EPDM maintain elastic memory without cracking, drying out, or leaking after decades of intense solar UV exposure, temperature extremes, and aggressive ozone exposure typical of high-rise commercial structures.

Commercial Application In-Depth

Complex Application Scenarios in High-Rise & Industrial Architecture

1. Rainscreen Façades and Ventilated Cavities: Modern curtain wall designs widely adopt ventilated rainscreen systems where exterior cladding panels (such as composite aluminum, terracotta, or profiled high-tensile steel) are separated from the interior weatherproofing membrane by an air drainage cavity. Roofing sheet screws deployed here serve as secondary support anchors, resisting gusting wind flutter while stabilizing insulation pins and bracket retainers against fluctuating pressure differentials.

2. Parapet Terminations and Roof-to-Wall Flashings: The interface between a building's flat or low-slope metal roof and its vertical curtain wall parapet requires multi-tiered water protection. Crest fixing hex washer flange screws fasten counter-flashing systems, membrane termination bars, and standing seam copings. High clamping torque ensures that thermal expansion of the flashing metal does not compromise perimeter water containment.

3. Industrial Megastructures, Aviation Hangars & Gigafactories: In massive facilities like gigafactories and aerospace hangars, building spans exceed hundreds of meters. Roofing and facade envelopes on these structures undergo tremendous structural deflection. High-tensile self-drilling screws engineered with extended unthreaded shank sections accommodate structural glide and thermal expansion joints without shearing fastener heads.

Global Industrial Trends Shaping Envelope Fasteners

The building envelope sector is undergoing rapid evolution propelled by three overarching megatrends:

  • Prefabricated Prefinished Volumetric Construction (PPVC): Faster construction schedules demand fasteners capable of rapid, single-operation drilling through multi-layer sandwich assemblies without pre-drilling or tail swarf build-up.
  • Stringent Carbon Accountability (EPD Certification): Developers demand Environmental Product Declarations (EPDs). DaHe leads the sector with energy-efficient heat treatment, closed-loop electroplating chemistry, and lower embodied carbon per ton of fasteners.
  • Extended 30- to 50-Year Building Lifespans: Conventional electro-galvanized screws fail within 5–7 years in severe outdoor environments. High-end curtain wall engineering requires Grade 304/316 bi-metal fasteners backed by multi-decade warranties against red rust and mechanical degradation.
Our Heritage & Milestone Timeline

Over Two Decades of Industrial Fastener Innovation

From a focused manufacturing workshop to the world's most advanced self-drilling screw smart manufacturing center.

Foundation
2003

Foundation of the Company

DaHe Industrial was founded in 2003, when the Chinese self drilling screw market was flooded with cheap, low‑quality products.

Against the trend, our founder Mr. Han set the company's sights on the mid‑to‑high‑end market, insisting on products that meet national standards.

Though our higher prices made us less competitive at first, our quality commitment never wavered. Over three years, word‑of‑mouth built DaHe into a trusted brand symbolizing quality laying a solid foundation for growth.

Growth
2008

Our Growth & Factory Expansion

From 2005 to 2007, we ran a small workshop.

In 2008, Mr. Han purchased 50 acres in his hometown and built our first factory – Handan Shan You Fasteners.

Equipment imported from Taiwan, with technical support from Taiwanese and Japanese friends. Upon startup, monthly output reached 50 tons, annual 6,000 tons making us a leader in China's self‑drilling screw industry in terms of precision and stability.

Development
2014

Our Rapid Development

As the domestic economy boomed, market demand soared and supply fell short for years.

Our brand gradually rose to a top national level, and by then, our technology had matured to the point where we surpassed well-known Taiwanese and other leading manufacturers.

In 2014, we acquired a second plot of land and built our second factory – Shenzhen DaHe Industrial Co., Ltd. Hebei Branch.

Full Vertical
2014

Full Vertical Integration

The second factory covers 200 acres, with a monthly output of over 1,500 tons and an annual output of 20,000 tons. Its launch marked the first in the industry to bring all processes in‑house – from raw material to packaging, with no external outsourcing.

This completed our full industrial chain and closed‑loop quality control. Since then, we have become the leading brand nationwide in both market share and reputation.

Phase III Smart Manufacturing
2019

Smart Manufacturing & Green Production

We then intensified new product development, smart system and ERP implementation, and green production investments.

In 2019, we purchased 300 acres for our third factory (Hebei Xilide Metal Manufacturing Co., Ltd.), which began operation that same year, along with a 6,000‑ton three‑story intelligent warehouse.

The launch marked the world's first fully automated self‑drilling screw production line – continuously advancing in intelligence, automation, and environmental sustainability.

Today Global Leader
2026

Today: A Global Leader

To date, our monthly output has reached 6,000–7,000 tons, with an annual output of 80,000 tons.

We have grown into the world's largest, highest‑yield, and most advanced manufacturer of self‑tapping and self‑drilling screws, equipped with the most comprehensive quality inspection equipment in the industry.

Our Future
Future Horizon

Our Future Ahead

Over the years, we have grown globally, serving customers across five continents. We lead with cutting-edge technology — automated production lines, precision testing, and continuous R&D. At the same time, we are committed to environmental responsibility: eco-friendly coatings, energy-saving processes, and waste reduction are core to our operations.

We deliver durable, high-performance screws that solve real‑world challenges — wherever our customers are.

Our journey continues, and we look forward to growing with partners worldwide.

Human Capital & Technical Strength

Our Dedicated Global Team

At present, DaHe Group has nearly 900 highly skilled employees powering manufacturing excellence.

50+
QC Team Members
20+
R&D Personnel
90+
Management Staff
100+
Technical Backbone
30+
Logistics Personnel
600+
Frontline Employees
Worldwide Strategy

Global Reach & Long-Term Vision

Expanding reliable fastening partnerships across high-rise, industrial, and facade sectors worldwide.

International Start

Before 2013, we focused primarily on domestic sales. In 2019, Alan (the chairman's son) returned, built our dedicated export team, and actively entered global markets. Export revenue has now approached 40% of the company's total output value, establishing strong commercial footprints in North America, Europe, Southeast Asia, Australia, and the Middle East.

Our Vision

We will continue to deepen our expertise in self-drilling screws, always targeting the mid-to-high-end market. Our vision is to become a globally recognized partner and the most valuable factory in our niche — dedicated to innovating roof screws, metal screws, window screws, decking screws, wood screws, timber screws, and color screws tailored for curtain wall and building envelope reliability.

Our Mission

“To help employees achieve their life dreams and assist customers in achieving their strategic goals.”

Industry Trust

Trusted by Global Supply Chain Partners

Collaborating with tier-one construction leaders, façade specialists, and international distributors.

Partners 1
Partners 2
Partners 3
Partners 4
Logo Standard
Partners 6
Partners 7
Comprehensive Fastening Portfolio

Full Fastening Solutions for Roofing & Curtain Wall Buildings

Browse our complete range of certified self-drilling, self-tapping, drywall, and specialty screws manufactured under strict ISO 9001 and CE quality standards.

Join DaHe – Powering the Future of Building Envelopes

At DaHe, we are more than a manufacturing company — we are a team committed to intelligent manufacturing, sustainable development, and creating long-term value for customers worldwide. Whether you are seeking OEM/ODM engineering partnerships or technical envelope fastening consultations, our automated facilities and metallurgic specialists stand ready to support your architectural vision.