China 2022 Latest Design Hex Head With Machine Galvanized - Truss head Self-Drilling Screws – DaHe factory and suppliers

2022 Latest Design Hex Head With Machine Galvanized - Truss head Self-Drilling Screws – DaHe

Short Description:

Product Detail

Product Tags

Feedback (2)

In the past few years, our company absorbed and digested advanced technologies both at home and abroad. Meanwhile, our company staffs a team of experts devoted to the development of Self Tapping Stainless Steel Screws For Metal , Slotted Hex Head Self Tapping Screw , Quarter Inch Self Tapping Screws , We are looking forward to even greater cooperation with overseas customers based on mutual benefits. Please feel free to contact us for more detail!

2022 Latest Design Hex Head With Machine Galvanized - Truss head Self-Drilling Screws – DaHe Detail:

A fastener with an extra wide head, twinfast thread and self drilling point. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer. Material including:C1022 or equivalent steel and 410 stainless

C1022

Common usage is to attach wire or metal lathe to metal studs of a thickness between 12-20 gauge.the head design offers low clearance and an extra large bearing surface.the recommended drive speed for installation is 2500 rpm.
Heat Treatment：Screws shall be quenched in liquid and then tempered by reheating to 625゜F minimum.
Hydrogen embrittlement: Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement(The production from DaHe company Only)

410 stainless

Not as corrosion-resistant as the 18-8 variety but will drill through harder materials than the 18-8 screw. The same hardness gradient rule applies: material drilled should be a minimum of 10-20 rockwell hardness points less than the fastener
Heat Treatment：An ideal method of hardening 410 stainless screws is a bright hardening process,which typically involves a vacuum furnace, Another key factor affecting hardness is the chemistry of the fastener–most elements have maximum values but not minimums.This fact can contribute to hardness variance.
Usually supplied without a secondary finish
Hydrogen embrittlement: there is not Hydrogen embrittlement risk occur

Note: there is no single standard for Truss head self-drilling screws.these values are offered as a guide, deviations from these specifications may occur

Specification

Brand	Solidex
Product Type	Truss head Self-Drilling Screws
Material	Stainless steel/carbon steel
Drive Type	Phillips/Six-lobe drive
Product Length	5/8″-12″/1/4″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 3/4″ 7/8″ 1″ 1-1/8″ 1-1/4″
Screw Diameter (mm)	6#/7#/8#/10#/12#
Thread Length	Fully Thread
RoHS	Depend on request
Finish	Clear Zinc/Customized different color
Corrosion resistance class	C3
Product Standard	GB/DIN/ANSI/BS/JIS
Approvals	CE
Packing	Coustomer’s Requirements
OEM	Accept customization
Sample	Free
Place of Origin	Hebei, China
Suitable Use Type	Suitable for indoor Use
Manufacturer Guarantee	1 Year Guarantee
Supply Ability	100 Ton/Tons per Day

NOTE:
1: Drill Capacity: 8g (0.75-2.5mm of steel), 10g (0.75-3.5mm of steel)
2:Driver Type: Philips P2
3:Installation Speed: 2300-2500 RPM Max Drill Speed

Product detail pictures:

Related Product Guide:

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for 2022 Latest Design Hex Head With Machine Galvanized - Truss head Self-Drilling Screws – DaHe , The product will supply to all over the world, such as: Colombia, Sweden, Slovenia, We always insist on the principle of "Quality and service are the life of the product". Till now, our products have been exported to more than 20 countries under our strict quality control and high level service.

Fine Thread Self Drilling Screws