-
Fast Hex Washer Wood Screw
Standard Wood Screws, Deep Thread Wood Screws and Pole Grip Screws in many styles & materials
-
Timber Construction Screw
ApplicationFor wood-wood connections, Screws fully replace construction nailsand don’t require drilling,they are available in lengths up to 400mm,theydeep TORX slot allow for better transmission of screw driving force andprevents the bit from jumping out.Features·90°countersunk head with milling ribs·Under head ribs for optimal sinking into the wood·Eliminates the need for separate discs·Shorter assembly times·Higher head pull values·Reduces the screw-in resistance by milling out the wood in the shaft area -
Truss Head Self-Tapping Screws
Application:
Truss head self-tapping screws are commonly used in various applications, including woodworking, metal fabrication, electrical and electronic equipment, automotive assembly, and more. They are suitable for fastening materials where a low-profile, aesthetically pleasing finish is desired.
Features:
·Truss head self-tapping screws consist of a threaded portion and a truss-shaped head. The head has a wide, flat top and a low-profile dome shape. The threaded portion is designed to drill its own hole and create threads as it is driven into the material.
·Truss head self-tapping screws can have various thread types, including coarse threads and fine threads. Coarse threads are commonly used for fastening into softer materials like wood, while fine threads are suitable for harder materials like metal.
-
Nylon Hex Washer Head Self-Tapping Screws
Applications:
Nylon-headed self-tapping screws are commonly used in applications that require strong thread engagement and resistance to loosening. They are often employed in materials such as plastics, wood, and thin metal sheets.
Features：
Nylon-headed self-tapping screws offer several advantages. Firstly, the nylon head provides a good sealing effect, preventing the penetration of liquids and gases. Secondly, the nylon head helps to reduce material damage, as it does not produce scratches or corrosion like metal screw heads. Additionally, nylon heads have lower thermal conductivity, making them suitable for applications that require electrical insulation properties.
-
Drywall Screws
Application:
·Drywall screws are specifically designed for fastening drywall or gypsum board. They typically have fine threads, a blunt head, and special thread design to penetrate the drywall easily and provide secure fastening.
·Drywall screws usually have a sharp point that allows them to penetrate the drywall without causing cracking. The threads are generally fine threads, sometimes referred to as “deep thread” or “drilling” threads. This design helps to firmly secure the screw in the drywall and prevent loosening.
Features
·Drywall screws are commonly made of carbon steel and undergo processes such as phosphating or galvanizing to enhance their corrosion resistance. This material and coating provide sufficient strength and protection to withstand the stresses and environmental factors during drywall installation.
·Drywall screws come in various specifications and sizes to accommodate different thicknesses and dimensions of drywall. Common specifications include diameter, length, and thread type.
-
Round Washer Head Self Tapping Screws
Application
Round Washer Self Tapping Screws are commonly used for fastening metal and plastic materials. They can be used to connect metal sheets, wood, plastic, composite materials, and other types of materials.
Features
These screws feature self-tapping threads, which means they can cut threads directly into the material without the need for pre-drilling. This makes the installation process more convenient, eliminating the requirement for a tapping tool.
-
Hex Washer Head Self-Tapping Screws
Application:
·Hex Washer Head Self-Tapping Screws are commonly used to join two or more metal or non-metal materials together. They are suitable for materials such as sheet metal, wood, and plastic.
Features
·Thread design: These screws have a self-tapping thread design, which means they can create their own threads within the material. This design eliminates the need for pre-drilling, making installation more convenient.
·Hexagonal washer head design: The Hex Washer Head is a shape of the screw head, featuring six flat surfaces that can be tightened using a hex wrench or socket. The washer head design allows the screw to have better contact with the material surface, providing greater tightening force and resistance to slippage.
-
Chipboard Screws
Chipboard screws feature a slim shank with a very coarse thread that digs deeper and more tightly into the timber. In other words, more timber or composite board is embedded in the thread, creating an extremely firm grip.
Fix chipboard sheets and other soft material to timber with a flush finish. Featured countersunk head with ribs on underside. The ribbed head assists with removal of chipboard particles to sink the head flush.
For external installation we recommend T17 Construction Screws – these can be used also in treated pine. -
Flat Head Wood Screw
Standard Wood Screws, Deep Thread Wood Screws and Pole Grip Screws in many styles & materials
