Factory making Pancake Head Self Tapping Screws - Truss head Self-Drilling Screws – DaHe
Factory making Pancake Head Self Tapping Screws - Truss head Self-Drilling Screws – DaHe Detail:
A fastener with an extra wide head, twinfast thread and self drilling point. The head is an integrally formed round washer with a low rounded top that is approximately 75% the diameter of the washer. Material including:C1022 or equivalent steel and 410 stainless
C1022
Common usage is to attach wire or metal lathe to metal studs of a thickness between 12-20 gauge.the head design offers low clearance and an extra large bearing surface.the recommended drive speed for installation is 2500 rpm.
Heat Treatment：Screws shall be quenched in liquid and then tempered by reheating to 625゜F minimum.
Hydrogen embrittlement: Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement(The production from DaHe company Only)
410 stainless
Not as corrosion-resistant as the 18-8 variety but will drill through harder materials than the 18-8 screw. The same hardness gradient rule applies: material drilled should be a minimum of 10-20 rockwell hardness points less than the fastener
Heat Treatment：An ideal method of hardening 410 stainless screws is a bright hardening process,which typically involves a vacuum furnace, Another key factor affecting hardness is the chemistry of the fastener–most elements have maximum values but not minimums.This fact can contribute to hardness variance.
Usually supplied without a secondary finish
Hydrogen embrittlement: there is not Hydrogen embrittlement risk occur
Note: there is no single standard for Truss head self-drilling screws.these values are offered as a guide, deviations from these specifications may occur
Specification
|
Brand |
Solidex |
|
Product Type |
Truss head Self-Drilling Screws |
|
Material |
Stainless steel/carbon steel |
|
Drive Type |
Phillips/Six-lobe drive |
|
Product Length |
5/8″-12″/1/4″ 3/8″ 7/16″ 1/2″ 9/16″ 5/8″ 3/4″ 7/8″ 1″ 1-1/8″ 1-1/4″ |
|
Screw Diameter (mm) |
6#/7#/8#/10#/12# |
|
Thread Length |
Fully Thread |
|
RoHS |
Depend on request |
|
Finish |
Clear Zinc/Customized different color |
|
Corrosion resistance class |
C3 |
|
Product Standard |
GB/DIN/ANSI/BS/JIS |
|
Approvals |
CE |
|
Packing |
Coustomer’s Requirements |
|
OEM |
Accept customization |
|
Sample |
Free |
|
Place of Origin |
Hebei, China |
|
Suitable Use Type |
Suitable for indoor Use |
|
Manufacturer Guarantee |
1 Year Guarantee |
|
Supply Ability |
100 Ton/Tons per Day |
NOTE:
1: Drill Capacity: 8g (0.75-2.5mm of steel), 10g (0.75-3.5mm of steel)
2:Driver Type: Philips P2
3:Installation Speed: 2300-2500 RPM Max Drill Speed
Product detail pictures:
Related Product Guide:
We've got a really efficient group to deal with inquiries from prospects. Our purpose is "100% customer fulfillment by our product excellent, price & our group service" and enjoy a superb track record amid clientele. With many factories, we can easily deliver a wide selection of Factory making Pancake Head Self Tapping Screws - Truss head Self-Drilling Screws – DaHe , The product will supply to all over the world, such as: Slovakia, Mauritania, Sacramento, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.
By Rita from Ukraine - 2018.09.23 17:37
The customer service staff's attitude is very sincere and the reply is timely and very detailed, this is very helpful for our deal,thank you.
By Barbara from Algeria - 2017.06.29 18:55
